Specification and features.
HARDWARE FEATURES
Interface: 1x
Gigabit Ethernet RJ-45 port
- Yes! it's a giga port
Button Reset
- It has a reset button inside the main antenna.
- And other one in the POE adapter. for easy reset if your antenna is already mounted.
Power Supply 802.3af
PoE and 24 Passive PoE (PoE injector included)
- Be sure to remember your adapter specs. not every POE adapter are compatible mine is 802.3af.
Power Consumption 10.5W
- Low consumption for wide range antenna.
Dimensions ( W x D x H ) (215 × 46 × 27 mm)
- A very slim body casing.
Weatherproof Enclosure IP65
- I have similar device that mounted in my roof for 2 years. it can stand against storm and hotter summer heat.
Mounting Pole/Wall
mount (mounting kit included)
- It has two very thick and durable nylon straps included for pole mounting.
WIRELESS FEATURES
Wireless Standards IEEE
802.11a/b/g/n/ac
- Common standard for wireless connection.
Frequency 2.4GHz,
5GHz
- 2.4GHz low frequency but wider coverage and up to 40mbps speed depending on your location.
- 5GHZ High frequency but less coverage and up to 100mps+ i never tested my speed beyond 300Mbps because i dont have that kind of speed.
Signal Rate 802.11ac:
5G:6.5 Mbps to
867Mbps(MCS0-MCS9,NSS = 1 to 2 VHT20/40/80) 2.4G:78Mbps to
300Mbps (MCS8-MCS9 VHT20/40, NSS=1 to 3)
802.11n: 6.5 Mbps to 300 Mbps (MCS0-MCS15, VHT 20/40)
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 5.5, 11Mbps
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- I don't understand much of this Signal rate means. but when im at 2.4GHz i think i'm at 802.11g or 802.11a connection. for 5Ghz it will always be 802.11n.Wireless Functions
- 8 SSID for 2.4Ghz and 8 for 5Ghz. I never use multiple SSID unless i have guest at my house.
Enable/Disable Wireless Radio
- This features if you want to disable 2.4Ghz and use 5Ghz only. but i config my connection enabled both in same SSID. whatever 5Ghz failed 2.4Ghz will be its backup.
Automatic Channel Assignment
- Its common for a router to choose what channel has less noise in the vicinity or you can set it manually.
Transmit Power Control (Adjust Transmit Power on
dBm)
- in this settings that you can reduce your signal coverage smaller or wider radius.
QoS(WMM)
- Quality of Service you can set speed manage for 100 concurrent users for one antenna.
MU-MIMO
- This features purpose is for the multiple users can access wireless network at the same time.
Airtime Fairness
- I don't know what it means but i think it's for data traffic for every devices.
Beamforming
- according to TP-Link Beamforming is a signal processing technique. In simple words, it can locate the Wi-Fi devices and then strengthen the signal in the specific direction from AP to client.
- With Omni antenna, AP broadcasts Wi-Fi signal in all directions, which means no matter where your Wi-Fi devices are located, they all receive the signal with similar strength in same distance.
Band Steering
- Like my Settings i configure my AP both band at same SSID for 2.4GHz ang 5GHz. if 5GHz get weak my 2.4GHz will be its backup.
Load Balance
- For multiple user to get even data connection.
Rate Limit
- Limiting the speed for every users.
Reboot Schedule
- I always schedule my AP to reboot at 5AM.
Wireless Schedule
- You can turn off your Radio antenna for specific time this features use by parents.
Wireless Statistics based on SSID/AP/Client
- You can monitor every device speed that are connected at your AP.
Wireless Security Captive
Portal Authentication
- It's easy to config.
- but is main purpose of its have username and password for open SSID. this is sometimes used for business purpose.
Access Control
Wireless Mac Address Filtering
- This Features you can block MAC address or Allowed Mac to connect at your AP.
Wireless Isolation Between Clients
- For Security purpose every client in your AP cannot communicate each other.
SSID to VLAN Mapping
- I never tried this one.
- At Rogue AP you can detect all the area in with your area within the range of 200 meters at 360 Radius.
Transmission Power 23dBm,
max. (2.4GHz) 22dBm, max. (5GHz)
- One of most import part of your antenna is what is the maximum transmission. lower the transmission power and less covered area.
All in All my experience about this TP-Link EAP255 is very great and it never fails me. have a wide range and high speed transmission within 50 meter in open area. and 20 meter inside my home.